English (UK) 
日本語 (Japan) 
한국어 (Korean) 
Tiếng Việt 
中文 (Chinese) 
The ThetaVAC-2 machine: is smart vacuum mounting for bubble-free, deep resin penetration. Perfect for complex specimens requiring precision.
General Overview of ThetaVAC-2
The ThetaVAC-2 is a program-controlled vacuum mounting machine specifically engineered for embedding samples using Epoxy or other liquid mounting resins. This system excels in porosity treatment, allowing resin to penetrate the smallest pores and cracks quickly and effectively, ensuring superior edge protection and complete void filling.
Key Applications in Material Analysis
This equipment is highly suitable for sample preparation in the following fields:
Failure Analysis: Inspection of cracked or fractured components.
Casting Materials: High-porosity parts and light alloys.
Electronics: Mounting of components, Printed Circuit Boards (PCB), and micro-solder joints.
Geology & Ceramics: Rocks, minerals, and technical ceramics with porous structures.
Technical Features and Highlights
The ThetaVAC-2 integrates advanced features to optimize laboratory workflows:
Intelligent Control: Features a 5-inch touch screen for programming vacuum levels, cycle counts, and automatic suction/discharge times.
Extra-Large Chamber: With an internal diameter of Φ252mm, it can accommodate up to 12 samples (40mm diameter) simultaneously.
Electronic Turntable: Supports both clockwise (CW) and counter-clockwise (CCW) rotation for precise resin pouring into each mold.
Teflon Coating: The entire inner chamber is Teflon-coated for non-stick performance, making the cleaning of excess resin effortless.
Quiet Operation: Noise levels range from 55-60dB, making it ideal for quiet laboratory environments.
Technical Specifications
|
Parameter |
Technical Details |
|
|
Power supply |
Voltage |
100-240V / 50Hz |
|
Rated power |
35W |
|
|
Control panel |
Control panel |
5 inch |
|
Timing cycle |
0-10 minutes |
|
|
Maximum number of cycles |
100 |
|
|
Programs |
20 sets |
|
|
Control method |
Button inching |
|
|
Vacuum System |
Vacuum level |
0-90 kPa |
|
Maximum vacuum flow |
75 L/min |
|
|
Air consumption |
28-42 L/min |
|
|
Noise |
55-60 dB |
|
|
Working Chamber |
Diameter |
Ø252mm (Fits approx. 12 samples of Φ40mm) |
|
Height |
80-100mm depending on sample |
|
|
Direction |
CW / CCW |
|
|
Vacuum Pump |
Voltage |
100-240V / 50Hz |
|
Rated power |
350W |
|
|
Operating Environment |
Temperature |
0-60˚C |
|
Humidity |
0-95% RH |
|
|
Dimensions & Weight |
Weight |
18 kg |
|
Dimensions (WxDxH) |
507×464×267mm (Closed), 507×464×644mm (Open) |
|
Why Choose Trojan (Suzhou) Equipment?
Trojan is a leading manufacturer with a strict quality management process. The ThetaVAC-2 has been exported to over 40 countries (USA, Europe, Southeast Asia...), confirming its status for durability and high precision in the microstructural sample preparation industry.
Contact & Support
